Menu
Glass touch panel with 4 touch sensors and an OLED display for sound or climatization unit (mutually exclusive). Works as normal T-K4Gx-x glass touch panel plus a secondary mode to control sound or climatization.
A keyboard can be configured via the App or via the left MicroSwitch.
The T-OLED has 9 keys (can have up to 14 associated functions).
The four visible keys.
The Multitouch that is the “Touch” is applied simultaneously on the four keys.
The left and right horizontal slide is ideal for curtains or dimmers (1 or more on the same key).
The left and right vertical swipe is ideal for blinds (one or more on the same key).
The T-OLED has 9 keys (can have up to 14 associated functions).
The four visible keys.
The Multitouch that is the “Touch” is applied simultaneously on the four keys.
The left and right horizontal slide is ideal for curtains or dimmers (1 or more on the same key).
The left and right vertical swipe is ideal for blinds (one or more on the same key).
To associate an output of a “D-” DIN rail module, press the PROG key of that module and then press the button of the output to be controlled.
Press the key that you want to activate the output.
Check the FAQs for the output module you want to program.
To program an output of a “W-” module, use the left microswitch under the keypad.
One touch activates and lights the output.
Two rings the second.
Three touches activates and puts both into programming simultaneously.
Check the FAQs for the output module you want to program.
Note: While the PROG is in Red and the Output in Green in programming, if someone presses a key other than the desired one, it will close the association with a key other than the desired one.
To associate an output of a “D-” DIN rail module, press the PROG key of that module and then press the button of the output to be controlled.
Press the key that you want to activate the output.
Check the FAQs for the output module you want to program.
To program an output of a “W-” module, use the left microswitch under the keypad.
One touch activates and lights the output.
Two rings the second.
Three touches activates and puts both into programming simultaneously.
Check the FAQs for the output module you want to program.
Note: While the PROG is in Red and the Output in Green in programming, if someone presses a key other than the desired one, it will close the association with a key other than the desired one.
Make sure the keyboard is in automation mode ().
In the APP, go to the menu on the left and select PROGRAM.
Find the output and put it in programming by clicking on the option on the right side.
Press the key (the output will no longer appear as in APP programming).
Grades:
– To ensure that the T-OLED is in automation mode, you will need to see (), to test it, press a key and it should show “ON/UP” or “OFF/DOWN” on the display. If this does not happen, press the upper right and lower left keys simultaneously for 5 seconds until you hear a confirmation beep.
-You will see the PROG in Red and the Output in Green in the modules, indicating that programming is in progress if someone presses another key than the desired one, this will close the association with that other key than the desired one.
Make sure the keyboard is in automation mode ().
In the APP, go to the menu on the left and select PROGRAM.
Find the output and put it in programming by clicking on the option on the right side.
Press the key (the output will no longer appear as in APP programming).
Grades:
– To ensure that the T-OLED is in automation mode, you will need to see (), to test it, press a key and it should show “ON/UP” or “OFF/DOWN” on the display. If this does not happen, press the upper right and lower left keys simultaneously for 5 seconds until you hear a confirmation beep.
-You will see the PROG in Red and the Output in Green in the modules, indicating that programming is in progress if someone presses another key than the desired one, this will close the association with that other key than the desired one.
Yes you can. We recommend the APP to associate the various outputs with a key.
Go to the left menu and select PROGRAM.
Find the outputs and put them into programming.
Press the key (the outputs no longer appear as being programmed in the APP).
To associate several outputs in a single key, press PROG and the buttons of the different outputs that you want to program together, then press the key that you want to activate the outputs.
You can do the same steps on outputs of other modules at the same time (D-8ONOFF, D-4ONOFF or W-2ONOFF).
This process can be done all at once or in incremental steps per module, that is, we can add output blocks to a key at different heights.
Note: While the PROG is in Red and the Output in Green in programming, if someone presses a key other than the desired one, it will close the association with a key other than the desired one.
Yes you can. We recommend the APP to associate the various outputs with a key.
Go to the left menu and select PROGRAM.
Find the outputs and put them into programming.
Press the key (the outputs no longer appear as being programmed in the APP).
To associate several outputs in a single key, press PROG and the buttons of the different outputs that you want to program together, then press the key that you want to activate the outputs.
You can do the same steps on outputs of other modules at the same time (D-8ONOFF, D-4ONOFF or W-2ONOFF).
This process can be done all at once or in incremental steps per module, that is, we can add output blocks to a key at different heights.
Note: While the PROG is in Red and the Output in Green in programming, if someone presses a key other than the desired one, it will close the association with a key other than the desired one.
Yes. Simply repeat the programming process from an output to a tactile key multiple times. It is with this flexibility that the project does not need to contemplate changes as they can be programmed at any time.
Yes. Simply repeat the programming process from an output to a tactile key multiple times. It is with this flexibility that the project does not need to contemplate changes as they can be programmed at any time.
This functionality is now present using APP 3 and 5 together with D-Gateway 3.0 and 5.0 in all new Atouch homes.
You can press the left microswicth present on the underside of each keyboard for 2 seconds, then press it again for 5 seconds and the backlight will turn off. Repeating the process turns the backlight on again.
This functionality is now present using APP 3 and 5 together with D-Gateway 3.0 and 5.0 in all new Atouch homes.
You can press the left microswicth present on the underside of each keyboard for 2 seconds, then press it again for 5 seconds and the backlight will turn off. Repeating the process turns the backlight on again.
One scenario can be for each of the 4 keys.
There is the multi-touch key which is ideal for this function. Multi-touch is the selection of 4 keys at the same time “slapping”.
To associate the outputs to the keyboard, you have to put them in programming mode (via the APP or output buttons) and then press the 4 keys simultaneously with your hand covering the entire keyboard, this step ensures that the key now controls these outputs.
Place the outputs in the state in which you want to define the scenario, press the four keys for 5 seconds until you hear a confirmation “Beep”.
To manage the advanced functions of each key, it is recommended to use the APP.
In the APP, access the menu on the left and select the option “Configure Keyboard”.
Press a key on the keyboard that you want to access advanced functions and the representation of the keyboard will appear on your phone’s screen.
Choose the key you want to change the settings and select the options in the fields that are visible below.
One scenario can be for each of the 4 keys.
There is the multi-touch key which is ideal for this function. Multi-touch is the selection of 4 keys at the same time “slapping”.
To associate the outputs to the keyboard, you have to put them in programming mode (via the APP or output buttons) and then press the 4 keys simultaneously with your hand covering the entire keyboard, this step ensures that the key now controls these outputs.
Place the outputs in the state in which you want to define the scenario, press the four keys for 5 seconds until you hear a confirmation “Beep”.
To manage the advanced functions of each key, it is recommended to use the APP.
In the APP, access the menu on the left and select the option “Configure Keyboard”.
Press a key on the keyboard that you want to access advanced functions and the representation of the keyboard will appear on your phone’s screen.
Choose the key you want to change the settings and select the options in the fields that are visible below.
Go to the menu on the left and select DELETE find the output(s) and put them in programming, press the key, the output(s) no longer appear as being in programming in the APP.
Go to the menu on the left and select DELETE find the output(s) and put them in programming, press the key, the output(s) no longer appear as being in programming in the APP.
Press the “PROG” key and the red LED lights up.
Select the output(s) from which you want to remove the key by pressing the corresponding button(s) and the green LED(s) will remain lit.
Press the PROG key for 2 seconds and the red LED will flash.
On the keyboard press the key you want to remove the association.
Press the “PROG” key and the red LED lights up.
Select the output(s) from which you want to remove the key by pressing the corresponding button(s) and the green LED(s) will remain lit.
Press the PROG key for 2 seconds and the red LED will flash.
On the keyboard press the key you want to remove the association.
Press the keyboard’s left microswitch that is placed over the module with the output where you want to erase any key.
Press the keyboard’s left Micro Switch for more than 2 seconds.
Press the key you want to unassociate (this can be on the keyboard itself or on any other in the installation).
Press the keyboard’s left microswitch that is placed over the module with the output where you want to erase any key.
Press the keyboard’s left Micro Switch for more than 2 seconds.
Press the key you want to unassociate (this can be on the keyboard itself or on any other in the installation).
To clean your keyboards, use a damp cloth with soap or diluted detergent.
The use of glass cleaner, alcohol or thinner when in contact with the back part weakens the glue and may lead to replacement of the keyboard with exclusion of warranty.
To clean your keyboards, use a damp cloth with soap or diluted detergent.
The use of glass cleaner, alcohol or thinner when in contact with the back part weakens the glue and may lead to replacement of the keyboard with exclusion of warranty.
Subscribe to our newsletter and receive news, tips and offers Atouch
