Command for switching 2 independent circuits up to 16A. This command is suitable for switching lights or other electrical loads.
The W-2ONOFF module is used to control up to 2 sets of lights, sockets, any type of load groups.
It is typically used in refurbishments and allows to replace the traditional stereo with our module with communication and drive via BUS, install reliable home automation by wire without building works in the house.
On top of this module can be placed an Atouch touch panel for automation like one for Clima Control or Audio.
With this we create what we call distributed installation which is characterized by the derivation for the lamp lines being done from the wall box.
Actuation on the outputs can be using the keys on the touch panels, mobile application, or even the buttons on the modules.
Actuation on the outputs can be using the keys on the touch panels, mobile application, or even the buttons on the modules.
We recommend the APP to associate an output to a key.
Go to the left menu and select PROGRAM, find the output and put it in programming by pressing the option on the right side, press the key (the output will no longer appear as in programming in the APP).
We recommend the APP to associate an output to a key.
Go to the left menu and select PROGRAM, find the output and put it in programming by pressing the option on the right side, press the key (the output will no longer appear as in programming in the APP).
The outputs of this module can be programmed without App, just with a touch panel installed on it. By pressing the left microswitch on the lower face of the touch panel.
One click corresponds to the first output, two clicks corresponds to the second output, three clicks corresponds to both outputs simultaneously. Then tap a key on the touch panel to be associated with the output option you chose to program.
The outputs of this module can be programmed without App, just with a touch panel installed on it. By pressing the left microswitch on the lower face of the touch panel.
One click corresponds to the first output, two clicks corresponds to the second output, three clicks corresponds to both outputs simultaneously. Then tap a key on the touch panel to be associated with the output option you chose to program.
Go to the left menu and select DELETE find the output(s) and put them in programming, press the key, the output(s) no longer appear as being in programming in the APP.
Go to the left menu and select DELETE find the output(s) and put them in programming, press the key, the output(s) no longer appear as being in programming in the APP.
On the panel placed on the W-2ONOFF module press the left microswitch of the panel to enter the programming mode of the output(s) from which you want to remove the key, 1 press for output 1, 2 press for output 2, three presses for both outputs.
Press left panel microswitch for more than 2 seconds.
On the panel placed on the W-2ONOFF module press the left microswitch of the panel to enter the programming mode of the output(s) from which you want to remove the key, 1 press for output 1, 2 press for output 2, three presses for both outputs.
Press left panel microswitch for more than 2 seconds.
Go to the left menu and select PANEL SETUP press a key on the panel that has the key you want to remove from all outputs.
Choose the key and in the COMMAND option choose DELETE then confirm with the check in the upper right corner of the screen.
Go to the left menu and select PANEL SETUP press a key on the panel that has the key you want to remove from all outputs.
Choose the key and in the COMMAND option choose DELETE then confirm with the check in the upper right corner of the screen.
Go to the left menu and select DELETE find the output and select the more options symbol on the right side of the screen. Confirm by selecting the option and validate by pressing the checkmark in the upper right corner.
Go to the left menu and select DELETE find the output and select the more options symbol on the right side of the screen. Confirm by selecting the option and validate by pressing the checkmark in the upper right corner.
Yes, you can make outputs 1 and 2 of the W-2ONOFF module timed.
On the W-2ONOFF module press the button of the output for 5 seconds and the LED of the output will blink once a second, which corresponds to a time of 1 second. By pressing the key you can blink 2,3,4,5,6 which corresponds to 1 minute, 5 minutes, 15 minutes, 30 minutes, 1 hour respectively.
After choosing the desired time press for 5 seconds to finish the process.
The timing of the outputs (1 and 2) must be done at the end of all other associations or programming.
The timing is of the output and therefore valid for any key that activates this output and thus prevails over keys with timers programmed via APP.
Yes, you can make outputs 1 and 2 of the W-2ONOFF module timed.
On the W-2ONOFF module press the button of the output for 5 seconds and the LED of the output will blink once a second, which corresponds to a time of 1 second. By pressing the key you can blink 2,3,4,5,6 which corresponds to 1 minute, 5 minutes, 15 minutes, 30 minutes, 1 hour respectively.
After choosing the desired time press for 5 seconds to finish the process.
The timing of the outputs (1 and 2) must be done at the end of all other associations or programming.
The timing is of the output and therefore valid for any key that activates this output and thus prevails over keys with timers programmed via APP.
Press for 5 seconds on the output button.
Press for 5 seconds on the output button.
Make sure PROG LOCK is not active.
If on any D-BUSSUPPLY in the house the “LOCK” LED is flashing repeatedly steadily you will have to press 2 seconds on the “LOCK” to remove this inhibition to programming.
Make sure PROG LOCK is not active.
If on any D-BUSSUPPLY in the house the “LOCK” LED is flashing repeatedly steadily you will have to press 2 seconds on the “LOCK” to remove this inhibition to programming.
These modules communicate via the BUS protocol which is referenced to a neutral, meaning you only need one more wire in your house to ensure you have BUS everywhere.
These modules communicate via the BUS protocol which is referenced to a neutral, meaning you only need one more wire in your house to ensure you have BUS everywhere.
Subscribe to our newsletter and receive news, tips and offers Atouch
