Bus powered IP gateway. It allows visualization and control through the mobile application of your home, locally or remotely.
D-GATEWAYIP3.0 is the module that allows communication with phones, tablets or other IP devices in your home. It supervises the dedicated BUS and the distributed intelligence of all the modules, manages the authorized telephones, saves the basic configuration of the APP such as the divisions and the devices that compose them, as well as other advanced functions.
To authorize the telephone in your home, install the Atouch3.0 APP and search your home network for D-GATEWAYIP3.0, select the and when the APP tells you that you should act on D-GATEWAYIP3.0, notice that the left orange color, it means that it is time to press the LEARN button. After this step, wait for the process to finish.
Do not add new phones before completing this process.
To authorize the telephone in your home, install the Atouch3.0 APP and search your home network for D-GATEWAYIP3.0, select the and when the APP tells you that you should act on D-GATEWAYIP3.0, notice that the left orange color, it means that it is time to press the LEARN button. After this step, wait for the process to finish.
Do not add new phones before completing this process.
The visualization and management of authorized telephones in your home is done via the Atouch3.0 APP, the device must belong to that list in order to be able to edit it.
The visualization and management of authorized telephones in your home is done via the Atouch3.0 APP, the device must belong to that list in order to be able to edit it.
If you don’t have access to an authorized phone or tablet and the list is full, you won’t be able to manage the phones.
Only by resetting the gateway can all authorized telephones be removed from the list.
To restore factory settings, press the RESET button for 1 second.
When carrying out the RESET, all the configurations present in the D-GATEWAYIP3.0 will be lost, such as authorized telephone numbers, name and composition of the divisions. You will not lose the names of each output, the names of the security zones, the associations between panels and outputs as this information is recorded in the output modules.
If you don’t have access to an authorized phone or tablet and the list is full, you won’t be able to manage the phones.
Only by resetting the gateway can all authorized telephones be removed from the list.
To restore factory settings, press the RESET button for 1 second.
When carrying out the RESET, all the configurations present in the D-GATEWAYIP3.0 will be lost, such as authorized telephone numbers, name and composition of the divisions. You will not lose the names of each output, the names of the security zones, the associations between panels and outputs as this information is recorded in the output modules.
Press the LEARN button for 1 second and wait until the left LED stops flashing intensely.
This process is to ensure that D-GATEWAYIP maps all modules present in the house.
The time this process takes depends on the number of modules present in the house (1min – 10min).
During this process avoid interaction with the house via panels or telephones.
A phone cannot be authorized while this process is taking place.
Press the LEARN button for 1 second and wait until the left LED stops flashing intensely.
This process is to ensure that D-GATEWAYIP maps all modules present in the house.
The time this process takes depends on the number of modules present in the house (1min – 10min).
During this process avoid interaction with the house via panels or telephones.
A phone cannot be authorized while this process is taking place.
Just press the BACKUP button for 1 second and each module will save the settings at that time. These can be reset by doing a RESTORE.
Just press the BACKUP button for 1 second and each module will save the settings at that time. These can be reset by doing a RESTORE.
You can do it whenever you want.
We advise you at the following times:
– When the installer has finished programming your home;
– When you have made deep changes to key names or associations with outputs.
– Before carrying out any technical intervention or that may require restoring the previous state.
You can do it whenever you want.
We advise you at the following times:
– When the installer has finished programming your home;
– When you have made deep changes to key names or associations with outputs.
– Before carrying out any technical intervention or that may require restoring the previous state.
The Lock button is used to lock programming commands in your home.
Press the Lock button and the right LED will flash constantly.
This prevents someone less experienced from doing unwanted programming via modules, panels or APP at a global level.
To inhibit only some users, use the password option present in the settings of the left menu of the Atouch 3.0 APP.
The Lock button is used to lock programming commands in your home.
Press the Lock button and the right LED will flash constantly.
This prevents someone less experienced from doing unwanted programming via modules, panels or APP at a global level.
To inhibit only some users, use the password option present in the settings of the left menu of the Atouch 3.0 APP.
To restore factory settings, press the RESET button for 1 second.
When carrying out the RESET, all configurations present in the D-GATEWAYIP3.0 will be lost, such as authorized telephones, name and composition of the divisions. You will not lose the names of each output, the names of the security zones, the associations between panels and outputs as this information is recorded in the output modules.
To restore factory settings, press the RESET button for 1 second.
When carrying out the RESET, all configurations present in the D-GATEWAYIP3.0 will be lost, such as authorized telephones, name and composition of the divisions. You will not lose the names of each output, the names of the security zones, the associations between panels and outputs as this information is recorded in the output modules.
You can do two different actions:
– Reset the D-GATEWAYIP3.0 to factory settings by pressing 1 second (phones, rooms, images).
Reset all modules to factory settings during installation by pressing for 10 seconds (names, settings and associations).
You can do two different actions:
– Reset the D-GATEWAYIP3.0 to factory settings by pressing 1 second (phones, rooms, images).
Reset all modules to factory settings during installation by pressing for 10 seconds (names, settings and associations).
No, it is a dedicated and encrypted process for each phone that temporarily lacks dedicated communication.
No, it is a dedicated and encrypted process for each phone that temporarily lacks dedicated communication.
Install the IPSETUP application to find and manage the IPs and ports of the Atouch.Winwel IP modules (Atouch or DONA).
Make sure you are on the WIFI network where D-GATEWAYIP3.0, D0815, D0808 or others are located.
Install the IPSETUP application to find and manage the IPs and ports of the Atouch.Winwel IP modules (Atouch or DONA).
Make sure you are on the WIFI network where D-GATEWAYIP3.0, D0815, D0808 or others are located.
If the house is new it should have been pre-configured by the installer, you just need to authorize your phone or tablet.
If the house is not a new installation, you should at least remove all previously authorized phones using the Atouch3.0 APP (In the left side menu, go to the phones option and remove all that you do not know.
If the house is new it should have been pre-configured by the installer, you just need to authorize your phone or tablet.
If the house is not a new installation, you should at least remove all previously authorized phones using the Atouch3.0 APP (In the left side menu, go to the phones option and remove all that you do not know.
Yes, To use the new AP 3.0 you need the new D-GATEWAYIP 3.0.
Yes, To use the new AP 3.0 you need the new D-GATEWAYIP 3.0.
Yes, the new D-GATEWAYIP 3.0 allows access to a house with the 2015 APP but it does not guarantee the operation of all the functionalities implemented in the D-GATEWAIP 3.0 such as managing telephones in the APP, saving rooms, turning off the backlighting of panels, among others.
If possible, it is not recommended.
Yes, the new D-GATEWAYIP 3.0 allows access to a house with the 2015 APP but it does not guarantee the operation of all the functionalities implemented in the D-GATEWAIP 3.0 such as managing telephones in the APP, saving rooms, turning off the backlighting of panels, among others.
If possible, it is not recommended.
The IP is 192.168.1.31 but use IPSETUP to see the current one or change it to your home network range.
The IP is 192.168.1.31 but use IPSETUP to see the current one or change it to your home network range.
Subscribe to our newsletter and receive news, tips and offers Atouch
Apoio ao cliente