The D-8DALI is a DIN rail module for digital DALI lighting control, allowing you to manage up to 8 individual DALI drivers with automation commands.
Each D-8DALI module allows control of up to 8 DALI drivers individually.
Each D-8DALI module allows control of up to 8 DALI drivers individually.
No. An external DALI power supply is required to power the drivers.
No. An external DALI power supply is required to power the drivers.
ADR left/right: Navigate between the 8 DALI drivers.
DIM up/down: Adjust the brightness of the selected driver.
ADR left/right: Navigate between the 8 DALI drivers.
DIM up/down: Adjust the brightness of the selected driver.
Use a dedicated circuit breaker for each D-8DALI.
Connect the DALI driver to the DA terminals.
Hold the PROG button and turn on the breaker.
Use DIM up/down to choose the address (count PROG LED blinks).
Press ADR right to confirm the address.
Repeat for each driver.
Connect all drivers to the DALI BUS at the end.
Use a dedicated circuit breaker for each D-8DALI.
Connect the DALI driver to the DA terminals.
Hold the PROG button and turn on the breaker.
Use DIM up/down to choose the address (count PROG LED blinks).
Press ADR right to confirm the address.
Repeat for each driver.
Connect all drivers to the DALI BUS at the end.
Check how many drivers are on the DALI line.
Divide into segments of max. 8 drivers.
Install one D-8DALI per group.
Press PROG for 5 seconds to auto-learn the drivers.
Use ADR left/right to browse.
Use DIM up/down to adjust brightness.
Check how many drivers are on the DALI line.
Divide into segments of max. 8 drivers.
Install one D-8DALI per group.
Press PROG for 5 seconds to auto-learn the drivers.
Use ADR left/right to browse.
Use DIM up/down to adjust brightness.
Press PROG.
Select the driver with ADR left/right.
Press the desired key or slider on the keypad.
Press PROG.
Select the driver with ADR left/right.
Press the desired key or slider on the keypad.
Press PROG.
Select the driver using ADR buttons.
Hold PROG for 2 seconds.
Press the key or slider to remove the assignment.
Press PROG.
Select the driver using ADR buttons.
Hold PROG for 2 seconds.
Press the key or slider to remove the assignment.
Subscribe to our newsletter and receive news, tips and offers Atouch
