DIN rail unit for controlling LED strip RGB Common Anode up to 200W. This unit requires only an external DC power supply for the LEDs.
It is used for dimming LED RGB 12/24V strips.
Using the APP set the RGB Light in programming and then press a key from a touch panel.
Pressing the PROG key in the D-DIMRGB module and then pressing a key of a touch panel will set it in On/Off mode, to dimm the ligth you can use a long press.
Pressing the PROG key in the D-DIMRGB module and then sliding between keys of a touch panel will make that slide dim the ligth.
Using the APP set the RGB Light in programming and then press a key from a touch panel.
Pressing the PROG key in the D-DIMRGB module and then pressing a key of a touch panel will set it in On/Off mode, to dimm the ligth you can use a long press.
Pressing the PROG key in the D-DIMRGB module and then sliding between keys of a touch panel will make that slide dim the ligth.
Yes, any Dimmer can be used both with normal panel and T-OLED.
We can control the dimmer through the on / off mode, pressing PROG and a key. Or in slide between the keys increasing and decreasing the intensity.
Yes, any Dimmer can be used both with normal panel and T-OLED.
We can control the dimmer through the on / off mode, pressing PROG and a key. Or in slide between the keys increasing and decreasing the intensity.
Press PROG for more than 10 seconds until the LEDs blink.
This action will remove all module’s memory such as all keys that would act on the ligth are connected to it.
Press PROG for more than 10 seconds until the LEDs blink.
This action will remove all module’s memory such as all keys that would act on the ligth are connected to it.
Subscribe to our newsletter and receive news, tips and offers Atouch
